Washing Instructions
Hand washing with gentle pressure is preferred; machine washing and spin-drying are not recommended for items featuring complex 3D craftsmanship. If machine washing is necessary, turn the garment inside out, place it in a thick laundry bag, and select a delicate cycle.
Use lukewarm water (below 30°C) and a neutral detergent. Strictly avoid bleach and strong acidic or alkaline cleaning products to prevent damage to the embroidery threads and sequins.
After washing, sandwich the item between clean towels and press gently to absorb excess moisture. Lay flat to air dry; do not wring, twist, or expose to direct sunlight, as this may deform the 3D embroidery elements.
Ironing Guidelines
3D embroidery featuring sequins or tube beads utilizes thermoplastic materials; the iron must not come into direct contact with the embroidery surface. Place a thin cloth over the area and iron at a low temperature (70–80°C) from the reverse side.
For raised areas featuring ribbon or cord embroidery, avoid direct pressure; instead, use a steam-steaming technique (hovering the iron) to set the shape, preventing the embroidery from being flattened and losing its 3D effect.
For 3D embroidery on mesh or tulle base fabrics, direct contact with high heat is strictly prohibited. Use medium heat with a protective cloth layer to prevent the base fabric from shrinking or warping.





