What are the production processes for 3D embroidery?

Jul 17, 2026

Leave a message

Industrial Mass-Production 3D Embroidery Processes
These processes rely on computerized embroidery machines and are suitable for the large-scale production of apparel, footwear, headwear, and home textiles, offering high efficiency and consistent quality.

 

EVA Foam 3D Embroidery: The most mainstream basic technique. EVA foam of varying thicknesses (1–5mm) is placed on the fabric; embroidery thread completely wraps the foam. After stitching, excess foam at the edges is torn away, creating a full, raised 3D pattern. Standard flat embroidery machines can be used for this process.


Heat-Pressed Non-Woven Felt 3D Embroidery: A new, improved process. Fabric and non-woven felt (3–8mm thick) are stacked and embroidered simultaneously. Afterward, the backing is bonded via heat pressing at 130–160°C, and excess felt is mechanically removed. This allows the embroidery threads to stand vertically, forming a 3D layer 2–6mm thick. It resolves issues associated with traditional EVA foam-such as a stiff feel and residual adhesive at the edges-resulting in a softer, more aesthetically pleasing finish.


Hollow 3D Embroidery: Uses washable foam instead of EVA foam for the wrapping embroidery. Once the process is complete, the internal foam is washed away using a dry-cleaning machine, creating a hollow, raised 3D effect with a lighter, more airy appearance.


Towel Embroidery (Chain Stitch): A specialized towel embroidery head adjusts the tension between the top and bottom threads, pulling the bottom thread up to the surface to form interlocking loops. The finished product has a plush, 3D texture resembling a towel. It comes in two modes: manual (using a hand-cranked machine) and fully automatic (computerized). It is commonly used for decorative patterns on hoodies and baseball jackets.


Toothbrush Embroidery (Flocking-style Embroidery):A flocking needle is attached to a standard flat embroidery machine. The needle hooks fibers from a flocked sheet and implants them onto the target fabric. After stitching, the top film layer is cut away, allowing the threads to stand upright naturally and creating a dense, raised, velvety texture resembling toothbrush bristles.