General Preparations
Core Materials: EVA 3D foam (hardness: 50–75 Shore A; thickness selected as needed), mesh fabric, double-sided tape, fusible interfacing/hot-melt thread, embroidery thread, base fabric; optional wax paper for embroidery assistance.
Equipment & Tools:Standard computerized flat embroidery machine, skiving machine (for mass production; skiving range: 0.6–8mm), iron/heat press.
Reverse-Side Toothbrush Embroidery Process (Produces upright, neat threads; ideal for pure toothbrush embroidery styles)
Using the pattern dimensions, stitch a single outline on the mesh fabric to define the shape, then cut the mesh along the outer border. Apply double-sided tape around the perimeter of the cutout to prepare for the 3D foam, and apply another ring of double-sided tape along the fabric edge to secure the base fabric.
Place a layer of mesh fabric beneath the 3D foam to prevent the embroidery threads from sinking into the foam during stitching; optionally, place a layer of wax paper over the foam surface to further reduce embroidery resistance.
Affix the fabric (with the reverse side facing up) onto the double-sided tape, lay a sheet of fusible interfacing over the embroidery area, and start the flat embroidery machine to complete the stitching.
Use an iron to activate the fusible interfacing, bonding the roots of the embroidery threads to prevent loosening during subsequent processing; for mass production, hot-melt thread can be used as the bobbin thread instead-heat pressing secures the thread ends while balancing durability and base fabric breathability.
Flip the embroidered piece over, trim away the surface mesh, and remove the 3D foam. Finally, use a skiving machine to shave the tops of the raised embroidery threads flat, resulting in a finished product with upright, bristle-like threads.





